• Shiggles@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      2
      ·
      15 days ago

      Disclaimer - not an electromagnetic scientist wizard

      My understanding is that EMPs are more of a concern for the tiny electronics on computers versus relatively large motors or batteries. So, an electric vehicle is still at risk, but I don’t think it’d be any more at risk than any ICE car that’s all computerized anyways.

      • CosmoNova@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        15 days ago

        With all the touch screens and computer controlled door handles I wouldn‘t bet on a Tesla in this showdown.

      • JohnDClay@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        1
        ·
        15 days ago

        Nuke type EMPs are a threat to very long wires, like miles long ones used to transmit power. The blast causes a ripple in the earths magnetic field that induces current over huge distances. But I don’t know what a more handheld device would affect.

        • Shiggles@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          1
          ·
          14 days ago

          Electric motors work by inducing a magnetic field with coils of wire, so I’m sure a strong enough EMP would disrupt it temporarily, but I don’t know if it would meaningfully damage anything after the EMP ceased.

          • JohnDClay@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            1
            ·
            14 days ago

            They’re made specifically to deal with high electromagnetic flux, so it definitely wouldn’t hurt them long term. Best bet would be something higher frequency to mess with the computers.

        • skulblaka@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          2
          ·
          14 days ago

          In all seriousness microwaves are the #1 leading cause of death for hobby electronics people, be careful around them and know what you’re doing before you open it.

          • Gordon Calhoun@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            14 days ago

            I didn’t realize they were the #1 killer. Most of them via electrocution of the HV capacitor, I would imagine?

            15ish years ago I got lucky and didn’t kill myself on the first one I ever cracked open. I managed to become marginally more intelligent and after poking around in it decided it’d be smart to research the art of microwave dismantling, which led to a minor anxiety attack and cold sweats when I realized how stupid I had been.

            • skulblaka@sh.itjust.works
              link
              fedilink
              English
              arrow-up
              1
              ·
              14 days ago

              Yep. That HV capacitor will turn you into orbital bacon with a quickness, and it keeps a charge for way longer than you’d ever think was realistic. In the same vein as “assume every gun is loaded”, also assume every capacitor is charged.

              • Gordon Calhoun@lemmy.world
                link
                fedilink
                English
                arrow-up
                1
                ·
                14 days ago

                I think I even read it can gradually spontaneously self-charge if left alone long enough with the terminals insulated from each other. I don’t know if that’s actually true (it would seem to be a sort of Maxwell’s Daemon at that point), but yeah, best to not take chances.

              • Gordon Calhoun@lemmy.world
                link
                fedilink
                English
                arrow-up
                1
                ·
                14 days ago

                Hahaha, funny you mention that. I was this close to trying to open an old CRT set many years ago when that little voice in my head said, hey, maybe look up what happens when you do that. I decided I didn’t need to go through with it.

                That being said, DLP sets are my absolute favorite to dig into. So many awesome optical components, mirrors, and cooling fans inside. I didn’t find anything that seemed too dangerous, either.

        • ramenshaman@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          14 days ago

          It’s quite dangerous, the magnetron can kill very easily. There’s this youtuber called styropyro who’s done some really cool stuff with them though

          • Gordon Calhoun@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            14 days ago

            He’s a treasure. The inside of a microwave is insane in its casual dangers. Like that HV capacitor, or, more insidiously, the beryllium insulator that can cause berrylliosis if broken and inhaled.

            • Ceedoestrees@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              14 days ago

              Sounds like you don’t even have to do anything to make it dangerous. Heck, let’s just chuck broken microwaves at the Teslas.

    • SlopppyEngineer@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      14 days ago

      For cars, you’re gonna need something a bit bigger. Large coil, capacitor bank to generate a static field and some high explosives to disrupt that field to give the pulse. It fries the wires in a car. Single use only.

      • Gordon Calhoun@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        14 days ago

        Sounds like an awesome YT video for backyard scientist or action labs or alpha phoenix or definitely styro pyro