Bought a Merkur 33C, a synthetic Parker brush, and a mühle soap bar thar I received today.

Not as close a shave as I’m used to, but my skin feels a lot less irritated than it used to after a shave. Cut myself twice, on my upper lip and on the underside of my chin.

  • darthsundhaft@piefed.social
    link
    fedilink
    English
    arrow-up
    3
    ·
    14 days ago

    I’ve been using a Merkur for 3 years now and I still can’t figure out how to not nick myself at least once.

    I think the contours of my face just don’t work for the design of these tools. It’s a shame.

  • BurgerBaron@quokk.au
    link
    fedilink
    English
    arrow-up
    3
    ·
    13 days ago

    MÜHLE Traditional with Astra blades have served me well, haven’t managed to cut myself yet! Some razor burn but that’s from being a lazy git and not always soaking with a hot towel before going at it 😅.

  • Infynis@midwest.social
    link
    fedilink
    English
    arrow-up
    3
    ·
    14 days ago

    Congratulations! I will happily certify this as a Dull Man Experience™️. Absolutely classic 👏

  • YiddishMcSquidish@lemmy.today
    link
    fedilink
    English
    arrow-up
    3
    ·
    14 days ago

    I got one from the dollar tree and while the blades it came with were serviceable, I ordered some feather blades and it had been an absolute pleasure.

  • crank0271@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    14 days ago

    Not as close a shave as I’m used to

    How many passes did you do? I’ve found that once you develop your technique and become more comfortable with using a safety razor, the cuts will be fewer and the shave will be closer. I also learned that you do one pass with the grain, a second pass against the grain, and a third across the grain. When I do this not even babies’ bottoms can compare.

    Congrats on saving money and the environment (in a small way). You’ll have to figure out responsible disposal of the blades. I took a condensed milk can, carefully pushed a big knife into the top of it, drained it fully, and labeled it “sharps.” I keep this under my sink with a piece of tape over the slot. Each time I retire a blade it goes in the container. Someday my descendants will tape it securely and it will go in the trash (because I’ve been shaving this way for well over a decade and have yet to fill it, but also I really stretch the life of my blades for no good reason).

    • Elting@piefed.social
      link
      fedilink
      English
      arrow-up
      4
      ·
      14 days ago

      I find it so funny that they used to just put a hole in the wall and you would shove old razors in it. A hazard for renovators 60 years later.

    • Brainsploosh@lemmy.world
      link
      fedilink
      arrow-up
      3
      ·
      13 days ago

      I get much closer shaves with my Merkur 33c safety razor than I did with cartridges.

      I’ll suggest another order: go 1. with, 2. across, then 3. against the hair. Against is the most skin irritating and largest risk of nicks, so may well be done with the least amount of work.

      Also, warming the area to be shaved with warm water (or shower as you mentioned) does a lot for the closeness of the shave, don’t skip out.

      I find brush and lather mostly to make shaving smoother and lessen skin irritation, not make for closer shaves, but your mileage may vary. Also consider warming your blade (I run it under the warm water) between passes, I find it also helps for the smoothness although can’t say why.

      If you have to apply force to the cutting (rather than letting “gravity” do the work) you probably need new blades. They are supposedly single use, but I can typically get 2-3 shaves in on a regular blade, and even up to six shaves with some blades (Korean Dorco platinum is my favorite).

      Adding force is the only way I get nicked nowadays, but it goes fast when I do, so I make sure to switch blades even between passes if need be.

      Also, depending on your face and skin, you might want to try a safety razor with a different blade angle, there are handles that give a (slightly) more aggressive shave — meaning closer shave but (slightly) higher risk for nicks and irritation.

      Best of luck!

    • ThePowerOfGeek@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      14 days ago

      What razor blades do you use? I started off years ago with Astra ones. They gave a good shave, and I like that I could get 2-3 shaved out of each side (so 4-6 in total per blade) before they became too dull. But they are made in Russia, and for moral reasons I switched to Feather (which are made in Japan). The Feather ones give a great shave, but they are really only useable once per side.

    • plateee@piefed.social
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      1
      ·
      14 days ago

      Next time (in like 30 years when you finally fill up yiu current can, use the church key method (one medium sized, triangle hole on one side, a smaller on the opposite side) and then after draining/rinsing, use a Dremel to cut a thin slot towards the top.

      When you fill that can after 30 years, you just hammer the top down and seal the hole that way.

  • Tempus Fugit@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    14 days ago

    Welcome to the club. I can’t speak for that model, but I love my safety razor. I’ve used less than $5 worth if razors in 2 years and my shave is comparable to the expensive cartridges. I’ll never go back.

  • Throbbing_banjo@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    1
    ·
    14 days ago

    Blades make a huge difference. I buy Feather blades 50-100 at a time and have yet to find a closer shave with anything else. Try those.

    Good pick on handle btw. I picked up a merkur 32c (I think) about fifteen years ago and it’s still as good as new.

  • Elting@piefed.social
    link
    fedilink
    English
    arrow-up
    1
    ·
    14 days ago

    After switching to safety razors many years ago I still haven’t used a single pack of double sided razors for it. I honestly don’t understand why people buy the plastic razors when it is neither more convenient or cheaper. Think I have the same brand head on mine, you gotta watch near the edges because they’re more likely to cut you.

    • bcgm3@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      14 days ago

      I honestly don’t understand why people buy the plastic razors when it is neither more convenient or cheaper.

      Exposure is definitely a big part of it. The only reason I’m using one is because some podcasts / YouTubers I liked were extolling them and I looked into it. I can’t recall ever seeing a safety razor for sale at any big grocery or drug store. I guess I could have just missed them. But they stock what gets advertised most, and by an immense margin: The dodeca-bladed monstrosities in either pussycat pink or blackout tacticool gunmetal. AFAIK, that’s what everyone I know uses. I get asked every now and then if I can recommend my barber for a shave, then I mention the safety razor, and most guys have no idea what I’m describing to them.

      Also, no matter the design, safety razors have an air of “old fashioned” that I think most people just cannot appreciate now. The notion that they’d ever have to do anything besides use the product and send it to the landfill is enough to make most people nope out immediately, and here you’ve got disassembling, reassembling, replacing parts, proper disposal… All that takes time and attention that most people can’t reconcile.

  • Scratch@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    1
    ·
    14 days ago

    This channel convinced me to make the jump, years ago. https://youtu.be/-qSIP6uQ3EI

    I still have an electric for a quick touch up, but proper shaves are with a Merkur Futur, Feather blade, Mühle badger brush and Taylor’s of Old Bond St. Sandlewood soap.

    Random face moisturiser afterwards (still a good quality one, but I don’t have a preferred brand.)

    I was skeptical about badger hair brushes VS my previous boar bristle, but it’s a noticeable improvement in the texture of the lather generated. Much finer bubbles.

  • Psythik@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    14 days ago

    I’m confused; aren’t most modern razors a safety razor? Did you originally start with a straight razor?

    • zout@fedia.io
      link
      fedilink
      arrow-up
      2
      ·
      14 days ago

      Safety razors are the ones with a removable two-sided blade. They’re quite the style these days, since everyone is getting sick of overpaying for gilette blades.

      • Psythik@lemmy.world
        link
        fedilink
        arrow-up
        0
        ·
        14 days ago

        Meh, you can get a 24pk of plastic razors at Wally World for like $8. That’s a two year supply for me. I never considered anything other than disposable because they’re so damn cheap.

        • shalafi@lemmy.world
          link
          fedilink
          English
          arrow-up
          0
          ·
          edit-2
          14 days ago

          I get 100 Japanese steel blades from Amazon for $10. They last me extra long because I strop them on the underside of my arm after use in the shower. You can do that with your razors as well!

          EDIT: Now that link is for 50 blades. They doubled the price since I last bought. 😡 Tariffs probably.

          • Psythik@lemmy.world
            link
            fedilink
            arrow-up
            0
            ·
            14 days ago

            Yeah I do the arm thing too. Learned it from a viral video in the early YouTube days when everyone watched the same things.

              • Psythik@lemmy.world
                link
                fedilink
                arrow-up
                1
                ·
                14 days ago

                Supposedly it sharpens the blade(s), similar to the oldschool way of using a piece of leather to accomplish the same thing. Move the blade up the underside of your forearm (where there’s no hair), in the opposite direction of how you would normally shave.

                IDK if it actually works but it makes me feel better.

      • Flatearth_Habeebi@lemmy.zip
        link
        fedilink
        arrow-up
        0
        ·
        14 days ago

        I do, but I use a trimmer and use the lowest it has. So, I always have that little 5 I’clock shade. You could also use those “dry razors” if you want zero. They’re those with circles in them I don’t know the right English name for them. lol

        • deadbeef79000@lemmy.nz
          link
          fedilink
          arrow-up
          1
          ·
          14 days ago

          I don’t know the right English name for them

          We just call them an “electric shaver” where I live, probably just “electric razor” in others.

  • Swordgeek@lemmy.ca
    link
    fedilink
    arrow-up
    0
    arrow-down
    1
    ·
    edit-2
    14 days ago

    mercur 33c is a tight shave. Take it easy with that one.

    Don’t press hard. Watch your angles. I was going to say consider a badger brush, but it looks like synthetics have come a long way in the last 15 years or so. At any rate, lather is key - it doesn’t have to be huge, but it has to be well-worked into your whiskers. You want your skin and the entire length of each whisker well-coated, so work it in.

    edit: Also, don’t take anyone else’s blade recommendations as gospel. The blade you need depends on your razor, your technique, your beard, your prep, your comfort, your skin, and some amount of random magic. Try a bunch. Maybe get a sampler.