• Mac@mander.xyz
        link
        fedilink
        arrow-up
        1
        ·
        1 month ago

        That’s because there is no governance for aiming headlights properly. It’s usually done by dealers who don’t care.

        Most headlight issues are because people have retrofitted improper lights into their factory casings. different light sources project light in different patterns so if you put an LED or an HID bulb in a halogen housing it will blind the fuck out of everyone.
        But at the same time if headlights aren’t aimed properly they’ll just blind anyone anyway regardless of the light pattern.
        On top of that really tall vehicles, even when aimed properly, still aim their headlights directly into your eyes just because of how high above the ground they are.

        Very little of the blinding headlights issues are due to the source of the light.

      • helenslunch@feddit.nl
        link
        fedilink
        arrow-up
        1
        ·
        1 month ago

        Yes, my Tesla came from the factory with the headlights pointed at the sky. Was getting flashed all over the place. Fortunately they have an easy GUI in the MCU to aim them. But I’m sure many drivers are not smart enough to figure that out or even realize it’s possible.

      • Vivendi@lemmy.zip
        link
        fedilink
        arrow-up
        2
        arrow-down
        1
        ·
        1 month ago

        “tesla” and “build quality” do not match, even before the cyberstuck

      • fuckwit_mcbumcrumble@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 month ago

        Unless they were aimed poorly from the factory (with how bad their cars are built I’d lean towards that being very probable) they should not be blinding. I know someone with a very early model 3 that had poorly aimed headlights, but he eventually got it fixed. But the 5 other people I know with Teslas are not at all blinding. My Outbacks slightly fucked up headlight is more blinding than their cars.

    • Grumbles@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      1 month ago

      This isn’t always correct. I have a 2021 Toyota and the lights are factory installed and way too bright. I’ve had the lights lowered by a mechanic, but I still blind oncoming traffic and frequently get people flashing their brights at me. I feel terrible, I don’t want to blind anyone. I had someone yelling at me about my aftermarket lights and I had to tell them they were factory, he was still mad at me. It drives me crazy, I hate these lights too! Replacements are over $1,000.

    • AA5B@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      1 month ago

      I don’t understand how LEDs were ever allowed with the same sockets. What legitimate use could that be.

      … plus this has somehow gotten so popular that my garage, part of a major regional chain, offered to replace my headlights with LED replacement bulbs

      … although I can see the personal motivation. When everyone else seems to be causing so much glare, you need all the help you can get

      • PeriodicallyPedantic@lemmy.ca
        link
        fedilink
        arrow-up
        1
        ·
        1 month ago

        On the basic end: because they’re cheaper, use less energy, are more reliable, and last longer.

        On the fancy end: have you seen demonstrations of Audi’s matrix LEDs? They have the ability to dim specific areas dynamically, so that they can track incoming traffic and keep them in a dim-zone while still keeping the road and shoulders well lit.

        Keep in mind that there is nothing special about LEDs that make them brighter; they can make LEDs dimmer and they can make halogens brighter, but the manufacturer has chosen not to.

        • AA5B@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          edit-2
          1 month ago

          Sure, but making them with the same socket, so they fit in the same place, despite having different beam shape and reflector requirements, is entirely wrong.

          My car has LED headlights and they fantastic. They also have a very sharp cutoff meant to keep it from blinding others, assuming correct alignment. It also claims to have the hardware for active matrix and will turn that on as soon as they get approval

          My older car that I keep for my team has noticeably dimmer lights. I’d really like to convert to LEDs and I know there are some that fit and are sold as replacements. But I know they’re not. Those manufacturers need to be fined for every kit sold like that

    • winterayars@sh.itjust.works
      link
      fedilink
      arrow-up
      0
      ·
      1 month ago

      1000% this. Aftermarket, fucked colors, and/or no alignment is the cause of the problems. I would add that a lot of aftermarket lights are also way too bright. Sure, the owner can see (a tiny bit) better but everyone else gets blinded. Even then, it’s not bad unless they’re not aligned properly. (Well, it’ll still blind you if it’s a truck directly behind you but that’s just trucks.)

      • 𝕾𝖕𝖎𝖈𝖞 𝕿𝖚𝖓𝖆@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        1 month ago

        I own a '97 Honda. The last owner had LEDs in it. The lenses weren’t designed for LEDs, they were designed for halogens. So one of the first things I did was revert the headlights to halogen bulbs. And they work perfectly fine. I drive in a suburb so the streets are already fairly well lit. I don’t need to cast a beam 5 miles out to see where I’m going.

        Also, it’s that soft yellowish white light. Not that harsh daylight bluish light everyone and their mom is obsessed with. I don’t get it. Anyway, the best thing you can do in 99 times of 100 is to consider what equipment you have and stick to OEM spec.

        • grue@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 month ago

          Anyway, the best thing you can do in 99 times of 100 is to consider what equipment you have and stick to OEM spec.

          Or if you do legitimately want to upgrade, consider swapping in something that was OEM spec on a higher trim level/fancier related car model (e.g. Acura stuff on your Honda).