The light came with an alternate mount that screws on to the handlebar but it makes taking the light off more annoying, and obviously removes the ability to freely put the light on different bikes

I was hoping this design was universal but none of the straps I’m seeing online have the screw hole. Well, there is one very similar strap but I’d have to pay 13€ postage on a 5€ item which offends me on a spiritual level

  • 7bicycles [he/him]@hexbear.net
    link
    fedilink
    English
    arrow-up
    6
    ·
    28 days ago

    Speaking from experience here; your problem isn’t gonna be the strap, it that it fits to the screw interface on all points. While they all look 99% similar, they’re not, unless this is a Lezyne or something.

    I’d advise you to buy a generic “flashlight bicycle mount” from wherever, something like this;

    Has the added bonus points for if it holds up and your light doesn’t you can also just use it for the next one.

    Alternatively glue and ziptie a garmin quarter lock mount (knockoff, obviously, but using that standard) to it and get yourself a female receiver to attach to your bikes handlebars. They’re all ubiqioutous and therefore well cheap.

  • unmagical@lemmy.ml
    link
    fedilink
    English
    arrow-up
    3
    ·
    28 days ago

    Do you know someone with a 3d printer? A replacement could be produced with a flexible filament.

  • ClassIsOver [he/him]@hexbear.net
    link
    fedilink
    English
    arrow-up
    2
    ·
    28 days ago

    Voile straps come in a lot of different sizes, and the holes will work in your favor with the screw mount.

    These things are amazing. I keep a few dozen of them in my car, and they’ve saved my ass a number of times. Once, they held the suspension together on a 12k lb work trailer until it could make it to a garage.

  • CommCat [none/use name]@hexbear.net
    link
    fedilink
    English
    arrow-up
    2
    ·
    28 days ago

    You can find almost anything bike related on aliexpress, If your search words aren’t working, you can take a picture of the item and do an image search on aliexpress

  • BanSwitch2Buyers [none/use name]@hexbear.net
    link
    fedilink
    English
    arrow-up
    2
    ·
    28 days ago

    Could possibly order another from Amazon and then return it with the broken strap, keeping the new one maybe. If you don’t need that1st hole (the broken one) I’d just tape it as Hestia recommended. Could maybe tape the whole thing over and then cut out the hole you need, even.

    • doublepepperoni [none/use name]@hexbear.netOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      28 days ago

      I don’t see how tape would be an improvement over the hard plastic mount.

      I’m looking for a solution that allows me to attach and take off the light quickly and put it on other bikes when needed

      • BanSwitch2Buyers [none/use name]@hexbear.net
        link
        fedilink
        English
        arrow-up
        3
        ·
        28 days ago

        No, tape the strap itself back together and then continue using it as before. The more and tighter you tape it the less elastic it’d be, but maybe you can wrap the middle of it with tape and sacrifice that hole. If that’s possible, hard to know how do-able that is without doing it myself.

  • Chana [none/use name]@hexbear.net
    link
    fedilink
    English
    arrow-up
    1
    ·
    28 days ago

    The screw thing is weird. Does the screw head just sit straight on the handlebar, scratching it up? Is the front bit rigid, providing a platform, or is it just basically all silicone?

    I agree with the idea of getting a garmin quarter lock mount. It’s a handy way to attach things, lots of cheap generic options, including those using silicone rubber bands, and it makes the challenge as simple as drilling a hole, assuming the mount doesn’t have the right size for that screw. You can get this on Aliexpress for a couple dollars with either free shipping if you buy a few more dollars worth of stuff or a couple dollars shipping.

    • doublepepperoni [none/use name]@hexbear.netOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      28 days ago

      The screw is for attaching the rubber mounting strap to the headlight itself. The light came with two different mounting options, the strap and a long plastic mounting arm with a Garmin mount on top and a separate mount for the headlight below. There’s an alternate hard plastic bit you can screw to the bottom of the headlight for that purpose. You then use a thumbscrew to attach the light to the mounting arm

      It’s just much less versatile than the strap was