• 1 Post
  • 14 Comments
Joined 1 year ago
cake
Cake day: July 22nd, 2025

help-circle
  • Ok, so the SFP cable would stay on the isp box. The internet signal would go through WAN into the new router for wireless, and the signal for wired ethernet would go through WAN into the new router, then back through WAN into the isp modem and out the SFP.

    I didn’t know the signal would go through WAN both ways and thought if the SFP cable was connected to the isp modem the signal just wouldn’t bother going through the new router. This stuffs confusing lol. I really appreciate you taking the time.


  • Oh cool, so I could just connect the WAN without changing anything on the isp modem/router and the new router would be it’s own subnet network, kind of like a guest network? Then when things look good I could just switch the isp modem/router to ‘bridge’ or DMZ settings and shunt everything through the new one?




  • Yeah I hadn’t realized this. I was hoping I could just swap out a new router for the current isp unit. It’s beginning to make sense though, I just have to turn the Bell modem/router to act as just a modem. Gonna take some time and research more into it before I make any decisions. Thanks for taking the time.


  • imminent_nebula@lemmy.caOPtoPrivacy@lemmy.ml•Router question
    link
    fedilink
    arrow-up
    0
    ·
    edit-2
    9 days ago

    OK that makes sense, thank you. WAN from bell to new router would cover the WiFi, then the blue cable into the new router, which would pass the signal back through the WAN line to the bell router and out the fiber line? Or would I need another cable to go LAN to LAN from new router to bell to get the signal to the fiber line? Does WAN go in both directions?

    Edit:

    and plug the blue ethernet into one of the new router’s LAN ports so that the new router is managing the ethernet for your home devices

    Wouldn’t that just completely bypass the Bell modem/router though?


  • wait, do you have 2 devices from your ISP? what kind(s) are they (make/model)

    No just the one. It’s a Bell Home Hub 3000. There’s a blue cable that plugs into LAN4, a telephone cable that plugs into TEL1 (both of these come from the junction box where the router/modem is), and white cable that plugs into a plug that’s closed off marked sfp, which then runs through the wall to a spot in the living room where I have an ethernet box that has a few devices connected by wired ethernet.

    I get that connecting a new router o the WAN port will run all wireless connections through the new router, but the white ethernet cable would still come out of the isp modem/router. I don’t understand how the wired ethernet would come from the new router.


  • Ok, looks like my isp router doesn’t have bridge mode but using DMZ apparently works. Honestly it’s the basics that I’m not getting. The setup seems pretty general, I guess I have to keep my isp router as a modem and connect the new router to the WAN on the isp modem/router. That makes sens but there’s another wire from the isp modem/router that goes to an ethernet box. Wouldn’t that bypass my new router? Would I have to swap the ethernet wire to the new one?