ChojinDSL

Frankfurt area code?

You can also self host it via docker.

Not really with mdadm raid5. But it sounds like you like to live dangerously. You could always go the BTRFS route. Yeah, I know BTRFS Raid56 “will eat your data”, but you said it’s nothing that important anyways. There are some things to keep in mind when running BTRFS in Raid5, e.g. scrub each disk individually, use Raid1c3 for metadata for example.

But basically, BTRFS is one of the only filesystems that allows you to add disks of any size or number, and you can convert the profile on the fly, while in use. So in this case, you could format the new disk with BTRFS as a single disk. Copy over stuff from one of your other disks, then once that disk is empty, add it as a additional device to your existing BTRFS volume. Then do the same with the last disk. Once that is done, you can run a balance convert to convert the single profile into a raid5 data profile.

That being said, there are quite a few caveats to be aware of. Even though it’s improved a lot, BTRFS’s Raid56 implementation is still not recommended for production use. https://lore.kernel.org/linux-btrfs/20200627032414.GX10769@hungrycats.org/

Also, I would STRONGLY recommend against connecting disks via USB. USB HD adapters are notorious for causing all kinds of issues when used in any sort of advanced setup, apart from temporary single disk usage.

Nextcloud.

Anybody else find it funny that her cart is just full of junk? No fresh fruit or vegetables to be seen. Some things never change in America.

Windows, in the past has been known to sometimes overwrite the Linux boot loader after a windows update, so be careful with that, since windows assumes no other os exists in the universe. Depending on your windows version, it might not be a bad idea to backup the license key. Recent versions store your computer’s information in the cloud, so unless you change a lot of components, it should reinstall without much hassle. But it doesn’t hurt to extract the key just in case. Microsoft gonna Microsoft. There are tools for this. E.g. jellybean key finder (or something like that).

Depending on the distro, it might help to disable secure boot in the uefi bios.

That being said, take it one step at a time. Don’t try to recreate everything you were doing in windows right off the bat. Get comfortable with the desktop first. Try different apps for certain tasks. If you have an Nvidia GPU, the experience can vary greatly between different distros. As others have mentioned, most distros have a “live environment” on the installation cd, which you can test to see if your hardware is recognised straight away. That being said, don’t feel like you’re married to a specific distro. Most Linux users will distro hop quite a bit, before they settle on one that just feels right. And even then they might change again after a while, if they get bored.

“Light the lamp, not the rat! Light the lamp not the rat!” That line from Muppets Christmas carol still cracks me up.

If you don’t know, or aren’t sure. Backup everything if you have the space. Once you’ve hit a couple of disaster scenarios, it will become apparent what stuff is really important.

Obviously, the stuff you can’t recreate otherwise is most important. But apart from that, even the stuff you can recreate from other sources might be worth backing up because of time savings. E.g. faster to restore from backup than to recreate.

Fond childhood memories of that little dude.

Back when I was still using Gentoo, configuring your own kernel was a rite of passage. It was kind of fun to try and configure it as minimalist as possible to cut down on the kernel compile time. Also, understanding all the different options and possibilities. And thanks to use flags, you had access to all these different patch sets for the kernel, which took a lot of the pain out of trying things like experimental schedulers or filesystems.

There is also the Hurd kernel, which has been in development for aeons.

Mislabeled files, not so much. Since there isn’t really a way to verify the content until it’s downloaded. You can adjust things like which file sizes are considered a certain quality, e.g. HD or 4k. But one approach could be that you define tags for release groups which you know and trust. And give those tags a higher score. This should lead to releases by those groups being preferred.

You can of course add multiple tags with positive and negative scores. For example I use tags to give a higher score to releases that have 5.1 audio, or which are non-hdr.

You can try to faff around with keywords and tags, e.g. give x264 or x265 a higher score rating, etc… As a failsafe you can configure a trashcan location and specify that all deleted files go there first and don’t get emptied for X amount of days.

Around 2003-2004. I was still a bit of a Linux noob, just getting to grips with Gentoo.

Had two no-name WiFi adapters that weren’t directly supported under Linux. Found some obscure forum thread that mentioned them, along with which lines in which source code driver to change to make these adapters work.

As a seasoned sysadmin, I approve.

I think on some distros this is disabled by default. I have forgotten how you can re-enable it.

UPS with usb allows you to configure a script to properly shutdown your server when a power outage happens and the UPS battery is about to run out.

Sure, somebody has to keep an eye on AI. (Pun intended).

I always loved Tekken more, because a good match between skilled players looked like something out of a choreographed kung Fu movie.

At least up to the PS2 era. It was also slower paced so you had to be more strategic. I always thought all the little character story movies were a lot of fun. SF feels very bare bones in comparison. But I stopped paying attention a while ago. MK had a distinguishing gimmick with the fatalities, but the general character design never meshed well with me.

Also, with windows and Mac OS, the new versions are usually just an excuse to make you pay again.