- cross-posted to:
- technews@radiation.party
- cross-posted to:
- technews@radiation.party
You must log in or register to comment.
Removed by mod
When I saw the image I thought it was a prototype. That’s pretty funny.
It is a prototype, but honestly the production model doesn’t look to much better. Warning, Twitter link
It’s been printed on a textured sheet, lmao
That can’t be a production product…God damn it i would be pissed if i paid for something and it turned up looking like that.
Not even that. My bog standard budget preassembled 3d printer already produces far better top layers than what’s shown in those pictures.
It’s using ten year old microcontroller technology too. And ten year old 3d printing technology.
I guess that’s what you get when your kickstarter takes ten years to deliver.
deleted by creator
Ok fair on the finish, but can we give an extra round of applause for this guy actually delivering something functional and not just the wish.com version. If it’s just one guy honestly I’m ok with mediocre 3d printing.
At least he finally came through.
Idk I feel like the people who back things on kickstarter have their expectations set way too high (and obviously the people running it are naive and play into that) but good lord you guys funded $70k for an oscilloscope and you’re upset it takes a decade? You are astoundingly lucky this even came out, and it only did because the guy that ran it has a heart of gold.
People really need to start to understand what it takes to bring a product to market before they start backing kickstarters
Yeah that dude probably could have ran with the money everyone forgot about. Amazing that he kept going tbh.
It’s 70k, it’s not going to get him a private jet he can fly to belize, it’s half a year of engineering salary, probably less.
1 person files a complaint and he’s done for life.
1 person files a complaint and he’s done for life
I very much doubt that, especially if he was behind an LLC.
That is if he did actually spend the money on developing the thing and just ran out before completion
I’d take 70k once please thx.
U act like he’d be unable to find a job if he walked away with the cash. Lol
People really need to start to understand what it takes to bring a product to market before they start backing kickstarters
Alternatively people should stop looking at Kickstarting as buying or investing in a product. It’s closer to a donation to help someone try and realize their idea. You support cool idea you think should exist and that should by your primary motivation. Getting something out of it is just added bonus.
I’m sorry. It looks like garbage. I can’t stand 3D printed stuff for anything other than prototypes.
And that armband is definitely a cheap Aliexpress bulk item. Seen a hundred of them.
Bruh a single dude made this over 10 years and shipped this all by himself. And that too on a total budget of 70k. I’m just glad this wasn’t just outright abandoned.
I think it’s really cool
The band is a NATO strap, pretty standard across the board.
The 3D printed watches are prototypes. Here’s what the shipped product looks like: https://twitter.com/BitBangingBytes/status/1695192177310150993
That just looks 3d printed on a textured sheet
It is… Looks like the textured plate from Prusa. Not even the “nicer” satin plate.
This is 3D printed.
deleted by creator
I definitely don’t need this but I want it so bad.
You just want to play Doom on it. We know.
You read my mind. That was my first question. Microcontroller? C? Ok yeah it can run doom for sure. But e ink? It’d look terrible…
This is one of those things that seems like it has a high gadget desirability potential on the surface, but I really can’t see replacing my existing perfectly functional (and probably significantly more durable) smartwatch with this. I already have one of those credit card sized pocket oscilloscopes. I can’t see any need for a device more portable than that. Even for the purposes of just showing off to your nerd friends, you’d only ever really be able to do that once per nerd, and then what?
I already have one of those credit card sized pocket oscilloscopes.
Why have I never heard of this
To be fair, it’s bigger than a credit card. But you get the idea.
Do you have any rationalizations I could use for buying this when I rarely even use a multimeter?
Well, you can hook it up to just about anything that generates any kind of signal source and use it as a decoration. Just, like, plug it in across your computer’s speaker outputs or something and you’ll have an instant visualizer, for instance. Or even a household outlet, and you can see just how close to 60hz your mains power actually is on a second-by-second basis. I know plenty of people who have retro tube oscilloscopes kicking around above their computer desks purely for the mad scientist vibe, and this will be a lot cheaper than one of those…
You’re good at this.
They’re cool, I used it as a volt probe a handful of times, or to check if a signal was moving (like, is the uart coming up at all).
I do chip/board bringup, it’s a niche as hell usecase, I only used it if I didn’t have a rigol around.
Later bought a portable hantek, it’s basically a star trek tricorder, utterly amazing.
Theyre kind of trash, I rocked one for a while in my gear bag, used it a handful of times, mostly as a simple volt probe or “the signal is moving”.
And my irl job is chip/board bringup so I’m the best use case.
The portable hantek ones though, I swear by them, they do everything and you can plug them in to usb and run them on Linux.
The credit card ones have shit probes and are just barely worth it, especially since I mostly work at higher frequencies, I wouldn’t trust it past audio and I wouldn’t trust the precision much around that.
If this was kickstarted 10 years ago, Smartwatches weren’t nearly as prevalent back then.
I’m quite certain I was rocking an OG Pebble smartwatch in 2013. In fact, the Pebble’s low power usage screen was probably the inspiration for the screen on this thing.
This is the best summary I could come up with:
Ten years ago on Kickstarter, Gabriel Anzziani unveiled plans to produce an oscilloscope watch.
After nearly forgetting about the project, early backers were surprised this month to receive a package containing the oscilloscope watch.
The watch mode has several useful features including formatting options for 24 vs 12 hour layouts and even an alarm.
The watch is powered by an 8-bit Xmega microcontroller with an internal PDI.
According to Anzziani, one goal of the project was to enable users to create their own apps for the watch.
Anzziani explains the expected battery life varies depending on whether or not the oscilloscope is in use.
The original article contains 337 words, the summary contains 104 words. Saved 69%. I’m a bot and I’m open source!
200kHz bandwidth is not a lot, but can be useful sometimes, especially on some car sensors, but not really on embedded development. I have a small FNIRSI DSO152 for fun too :)
It would be fine for audio work, for instance, but the overall size and resolution could make measurements a challenge.
I’m a little shocked it’s not a Watchy with a custom app on it
I wonder what the effective number of bits are on this thing.
Here is an alternative Piped link(s): https://piped.video/3m5qxZm_JqM?t=62
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source, check me out at GitHub.
My znaps must be right behind em
